Vinyl Cutter
From Kwartzlab
(Difference between revisions)
Punkin3.14 (Talk | contribs) (Created page with '{{Asset |Make=ASC 365 |Ownership=KwartzLab }}') |
Punkin3.14 (Talk | contribs) m |
||
| (2 intermediate revisions by one user not shown) | |||
| Line 1: | Line 1: | ||
{{Asset | {{Asset | ||
|Make=ASC 365 | |Make=ASC 365 | ||
| − | |Ownership= | + | |Model= |
| + | |Discipline=Printing | ||
| + | |Ownership= | ||
| + | |Hackable=No | ||
| + | |Date Manufactured=2002? | ||
}} | }} | ||
| + | =Description= | ||
| + | |||
| + | This is a 24" cutting plotter, capable of cutting a variety of thin materials under computer control. These materials are normally backed with a paper substrate. You adjust the blade to cut through the material, but not the paper. | ||
| + | |||
| + | =Use= | ||
| + | |||
| + | The vinyl cutter is currently controlled by a dedicated windows machine, running ArtCut. Files can be transferred via USB stick. | ||
| + | |||
| + | If you are interested in cutting something without a substrate (e.g., paper or cardboard), you '''must''' use a [http://www.signwarehouse.com/p-PLTA-CR09300K-A3.html carrier sheet], in order to protect the Teflon strip in the cutter from damage. We do not currently have any carrier sheets. | ||
| + | |||
| + | =Maintenance= | ||
| + | |||
| + | =Consumables= | ||
| + | ==Blades== | ||
| + | * 45 degree blades (general purpose) | ||
| + | * 30 degree blades (thinner materials, higher resolution) | ||
| + | * 60 degree blades (thicker materials, lower resolution) | ||
| + | |||
| + | ==Printables== | ||
| + | * 24" wide sign vinyl (white, black, and red) is available for purchase from Doug. | ||
| + | * additional vinyl, in the scrab bin, is free. Courtesy of Don. | ||
| + | * reusable pre mask film is available for purchase from Doug. | ||
| + | * 3M #1126 copper tape with conductive adhesive for making flexible circuits is not stocked; can be ordered. | ||
| + | |||
| + | =Manuals & Technical Documentation= | ||
| + | * [http://www.premiersign.co.uk/artcutmanual.htm ArtCut Manual] | ||
Latest revision as of 19:45, 19 December 2011
| Vinyl Cutter (Edit) | |
|---|---|
| [[File:|thumb]] | |
| Make | ASC 365 |
| Model | |
| Date Manufactured | 2002? |
| Discipline | Printing |
| Hackable | No |
| Ownership | |
Contents |
Description
This is a 24" cutting plotter, capable of cutting a variety of thin materials under computer control. These materials are normally backed with a paper substrate. You adjust the blade to cut through the material, but not the paper.
Use
The vinyl cutter is currently controlled by a dedicated windows machine, running ArtCut. Files can be transferred via USB stick.
If you are interested in cutting something without a substrate (e.g., paper or cardboard), you must use a carrier sheet, in order to protect the Teflon strip in the cutter from damage. We do not currently have any carrier sheets.
Maintenance
Consumables
Blades
- 45 degree blades (general purpose)
- 30 degree blades (thinner materials, higher resolution)
- 60 degree blades (thicker materials, lower resolution)
Printables
- 24" wide sign vinyl (white, black, and red) is available for purchase from Doug.
- additional vinyl, in the scrab bin, is free. Courtesy of Don.
- reusable pre mask film is available for purchase from Doug.
- 3M #1126 copper tape with conductive adhesive for making flexible circuits is not stocked; can be ordered.
