kwartzlab makerspace

Heavy Equipment Door » Kitchener-20120731-00050

I added a decal to the top-centre, smoothed down all the tape and decal with a putty knife, and then painted it all black. I can't wait to peel back the results!

I added a decal to the top-centre, smoothed down all the tape and decal with a putty knife, and then painted it all black. I can’t wait to peel back the results!

I marked 45-degree angles by measuring a square on the door, then running tape from one corner to the other. I placed rows of tape carefully, one after the other, until the door was completely taped. Alternating rows I only used a couple of short pieces, just to keep subsequent rows lined up. I then removed the small pieces. I marked the inner rectangular area, then cut and removed those inner pieces.
Peeling off the tape! Now it's looking like a door! It's mostly coming off easily.

This entry was posted on Wednesday, August 1st, 2012 at 12:00 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.