kwartzlab makerspace

Heavy Equipment Door » Kitchener-20120731-00043

The door is off its hinges and in the painting booth! I used a razor scraper to remove the tape and residue, filed down the burrs from ancient drilled holes, then cleaned it down with a wet cloth.

The door is off its hinges and in the painting booth! I used a razor scraper to remove the tape and residue, filed down the burrs from ancient drilled holes, then cleaned it down with a wet cloth.

Some tools I used. I got a pair of vinyl decals from XL Screenprinting, some John Deere Yellow spraypaint, matte black, tape, and a set of protective masks.
I painted it yellow first, concentrating around the edges and top half, where the hazard stripes and logo will go. I actually had to go get another can of paint, as one is not enough for a door.

This entry was posted on Tuesday, July 31st, 2012 at 11:59 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.